WLAN Interface |
|
WLAN Standards |
802.11a/b/g/n
802.11i Wireless Security |
Modulation Type |
DSSS
OFDM
MIMO-OFDM
|
Frequency Band for US (20 MHz operating channels) |
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
5.745 to 5.825 GHz (5 channels)
|
Frequency Band for EU (20 MHz operating channels) |
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels) |
Frequency Band for JP (20 MHz operating channels) |
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels) |
Wireless Security |
WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal |
Transmission Rate |
802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps |
Transmitter Power for 802.11a |
23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps |
Transmitter Power for 802.11n (5 GHz) |
23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
|
Transmitter Power for 802.11b |
26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @ 11 Mbps
|
Transmitter Power for 802.11g |
23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
19±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps |
Transmitter Power for 802.11n (2.4 GHz) |
23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz |
Transmitter Power |
|
US |
EU |
JP |
2.4 GHz |
26 dBm |
18 dBm |
18 dBm |
5 GHz (UNII-1) |
23 dBm |
21 dBm |
21 dBm |
5 GHz (UNII-2) |
23 dBm |
21 dBm |
21 dBm |
5 GHz (UNII-2e) |
23 dBm |
23 dBm |
23 dBm |
5 GHz (UNII-3) |
23 dBm |
– |
– |
|
Receiver Sensitivity for 802.11a (measured at 5.680 GHz) |
Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Typ. -85 @ 18 Mbps
Typ. -81 @ 24 Mbps
Typ. -78 @ 36 Mbps
Typ. -74 @ 48 Mbps
Typ. -72 @ 54 Mbps
Note: Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications. |
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) |
Typ. -69 dBm @ MCS7 20 MHz
Typ. -71 dBm @ MCS15 20 MHz
Typ. -63 dBm @ MCS7 40 MHz
Typ. -68 dBm @ MCS15 40 MHz
Note: Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications. |
Receiver Sensitivity for 802.11b (measured at 2.437 GHz) |
Typ. -93 dBm @ 1 Mbps
Typ. -93 dBm @ 2 Mbps
Typ. -93 dBm @ 5.5 Mbps
Typ. -88 dBm @ 11 Mbps
|
Receiver Sensitivity for 802.11g (measured at 2.437 GHz) |
Typ. -88 dBm @ 6 Mbps
Typ. -86 dBm @ 9 Mbps
Typ. -85 dBm @ 12 Mbps
Typ. -85 dBm @ 18 Mbps
Typ. -85 dBm @ 24 Mbps
Typ. -82 dBm @ 36 Mbps
Typ. -78 dBm @ 48 Mbps
Typ. -74 dBm @ 54 Mbps |
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) |
Typ. -70 dBm @ MCS7 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -67 dBm @ MCS7 40 MHz
Typ. -67 dBm @ MCS15 40 MHz |
WLAN Operation Mode |
Access point, Client, Client-Router, Master, Slave, Sniffer |
Antenna |
External, 2/2 dBi, Omni-directional |
Antenna Connectors |
2 RP-SMA female
|
Ethernet Interface
|
|
Standards
|
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for PoE
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol |
PoE Ports (10/100/1000BaseT(X), RJ45 connector)
|
1
|
Ethernet Software Features |
|
Management |
DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig |
Routing |
Port forwarding, Static Route, NAT |
Redundancy Protocols |
RSTP, STP |
Security |
HTTPS/SSL, RADIUS, SSH
|
Time Management |
SNTP Client |
Firewall |
|
Filter |
ICMP, MAC address, IP protocol, Port-based |
Serial Interface |
|
Console Port |
RS-232, 8-pin RJ45 |
LED Interface |
|
LED Indicators |
PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN |
Input/Output Interface |
|
Digital Inputs |
2
Max. input current: 8 mA
+13 to +30 V for state 1
+3 to -30 V for state 0 |
Alarm Contact Channels |
Relay output with current carrying capacity of 1 A @ 24 VDC |
Buttons |
Reset button |
Physical Characteristics
|
|
Housing
|
Metal
|
IP Rating |
IP30 |
Dimensions |
52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in) |
Weight |
860 g (1.9 lb)
|
Installation |
DIN-rail mounting, Wall mounting (with optional kit) |
Power Parameters
|
|
Input Current
|
0.6 A @ 12 VDC, 0.15 A @ 48 VDC
|
Input Voltage |
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet |
Power Connector
|
1 removable 10-contact terminal block(s)
|
Power Consumption
|
7.2 W (max.)
|
Reverse Polarity Protection
|
Supported
|
Environmental Limits
|
|
Operating Temperature
|
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
Storage Temperature (package included)
|
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Standards and Certifications
|
|
EMC
|
EN 61000-6-2/-6-4 |
EMI
|
CISPR 32, FCC Part 15B Class B
|
EMS
|
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF |
Hazardous Locations
|
ATEX, Class I Division 2, IECEx
|
Radio
|
EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC |
Safety |
EN 60950-1, UL 60950-1 |
Vibration
|
IEC 60068-2-6 |
MTBF
|
|
Time
|
570,854 hrs |
Standards
|
Telcordia SR332 |
Warranty
|
|
Warranty Period
|
5 years |
Details
|
See www.moxa.com/tw/warranty |